Bruno Morana
Publications
- Optical self-cooling of a membrane oscillator in a cavity optomechanical experiment at room temperature
P. Vezio; M. Bonaldi; A. Borrielli; F. Marino; B. Morana; P.M. Sarro; E. Serra; F. Marin;
Physical Review A,
Volume 108, pp. 063508, 2023. DOI: 10.1103/PhysRevA.108.063508 - Low Noise Opto-Electro-Mechanical Modulator for RF-to-Optical Transduction in Quantum Communications
Michele Bonaldi; Antonio Borrielli; Giovanni Di Giuseppe; Nicola Malossi; Bruno Morana; Riccardo Natali; Paolo Piergentili; Pasqualina Maria Sarro; Enrico Serra; David Vitali;
Entropy,
Volume 25, Issue 7, 2023. DOI: 10.3390/e25071087 - Direct Wafer-Scale CVD Graphene Growth under Platinum Thin-Films
Yelena Hagendoorn; Gregory Pandraud; Sten Vollebregt; Bruno Morana; Pasqualina M. Sarro; Peter G. Steeneken;
MDPI Materials,
Volume 15, Issue 10, pp. 3723, 2022.
document - Surface-micromachined Silicon Carbide Pirani Gauges for Harsh Environments
Jiarui Mo; Luke Middelburg; Bruno Morana; H.W. Van Zeijl; Sten Vollebregt; GuoQi Zhang;
IEEE Sensors Letters,
Volume 21, Issue 2, pp. 1350-1358, 2021. DOI: 10.1109/JSEN.2020.3019711 - Active feedback cooling of a SiN membrane resonator by electrostatic actuation
A. Borrielli; M. Bonaldi; E. Serra; P. M. Sarro; B. Morana;
Journal of Applied Physics,
Volume 130, pp. 014502, 2021.
document - Quantum Signature of a Squeezed Mechanical Oscillator
A. Chowdhury; P. Vezio; M. Bonaldi; A. Borrielli; F. Marino; B. Morana; G. A. Prodi; P. M. Sarro; E. Serra; F. Marin;
Physical Review Letters,
Volume 124, pp. 023601, 2020. DOI: 10.1103/PhysRevLett.124.023601 - Toward a Self-Sensing Piezoresistive Pressure Sensor for all-SiC Monolithic Integration
L.M. Middelburg; H.W. van Zeijl; S. Vollebregt; B. Morana; GuoQi Zhang;
IEEE Sensors,
Volume 20, Issue 19, pp. 11265-11274, 2020. DOI: 10.1109/JSEN.2020.2998915 - Quantum motion of a squeezed mechanical oscillator attained via an optomechanical experiment
P. Vezio; A. Chowdhury; M. Bonaldi; A. Borrielli; F. Marino; B. Morana; G. A. Prodi; P. M. Sarro; E. Serra; F. Marin;
Physical Review A,
Volume 102, pp. 053505, 2020.
document - Calibrated quantum thermometry in cavity optomechanics
Chowdhury, Avishek; Vezio, Paolo; Bonaldi, Michele; Borrielli, Antonio; Marino, Francesco; Morana, Bruno; Pandraud, Gregory; Pontin, Antonio; Prodi, Giovanni; Sarro, Lina; Serra, Enrico; Marin, Francesco;
Quantum Science and Technology,
2019. - Imaging Correlations in Heterodyne Spectra for Quantum Displacement Sensing
Pontin, A.; Lang, J. E.; Chowdhury, A.; Vezio, P.; Marino, F.; Morana, B.; Serra, E.; Marin, F.; Monteiro, T. S.;
Physical Review Letters,
2018. DOI: 10.1103/PhysRevLett.120.020503 - Effects of Conformal Nanoscale Coatings on Thermal Performance of Vertically Aligned Carbon Nanotubes
Cinzia Silvestri; Michele Riccio; René H. Poelma; Aleksandar Jovic; Bruno Morana; Sten Vollebregt; Andrea Irace; GuoQi Zhang; Pasqualina M. Sarro;
Small,
Volume 14, Issue 20, pp. 1800614, 2018. DOI: 10.1002/smll.201800614 - Wafer-Scale Integration for Semi-Flexible Neural Implant Miniaturization
Marta Kluba; Bruno Morana; Angel Savov; Henk Van Zeijl; Gregory Pandraud; Ronald Dekker;
In Proceedings Eurosensors,
pp. 941, 2018. DOI: 10.3390/proceedings2130941 - Effect of droplet shrinking on surface acoustic wave response in microfluidic applications
Thu Hang Bui; Van Nguyen; Sten Vollebregt; Bruno Morana; Henk van Zeijl; Trinh Chu Duc; P.M. Sarro;
Applied Surface Science,
Volume 426, pp. 253-261, 2017.
document - Liquid identification by using a micro-electro-mechanical interdigital transducer
Thu Hang Bui; Bruno Morana; Atef Akhnoukh; Trinh Chu Duc; Pasqualina M Sarro;
Analyst,
Volume 142, Issue 5, pp. 763-771, 2017. - Horizontally aligned carbon nanotube scaffolds for freestanding structures with enhanced conductivity
Cinzia Silvestri; Federico Marciano; Bruno Morana; Violeta Podranovic; Sten Vollebregt; GuoQi Zhang; Pasqualina M Sarro;
In Micro Electro Mechanical Systems (MEMS), 2017 IEEE 30th International Conference on,
pp. 266-269, 2017. - A mixing surface acoustic wave device for liquid sensing applications: Design, simulation, and analysis
T.H. Bui; B. Morana; T. Scholtes; T. Chu Duc; P.M. Sarro;
Journal of Applied Physics,
Volume 120, Issue 7, pp. 074504, 2016. - Control of recoil losses in nanomechanical SiN membrane resonators
A. Borrielli; L. Marconi; F. Marin; F. Marino; B. Morana; G. Pandraud; A. Pontin; G. A. Prodi; P. M. Sarro; E. Serra; M. Bonaldi;
Physical Review B,
Volume 94, pp. 121403, 2016. - Thermal characterization of carbon nanotube foam using MEMS microhotplates and thermographic analysis
Cinzia Silvestri; Michele Riccio; Rene Poelma; Bruno Morana; Sten Vollebregt; Fabio Santagata; Andrea Irace; GuoQi Zhang; Pasqualina M. Sarro;
Nanoscale,
Volume 8, pp. 8266-8275, 2016.
document - Microfabrication of large-area circular high-stress silicon nitride membranes for optomechanical applications
E. Serra; M. Bawaj; A. Borrielli; G. Di Giuseppe; S. Forte; N. Kralj; N. Malossi; L. Marconi; F. Marin; F. Marino; B. Morana; R. Natali; G. Pandraud; A. Pontin; G. A. Prodi; M. Rossi; P. M. Sarro; D. Vita;
AIP Advances,
Volume 6, pp. 065004, 2016. - Characterization of Thermal Expansion Coefficient of LPCVD Polycrystalline SiC Thin Films Using Two Section V-beam Actuators
S. Thomas; A. Jovic; B. Morana; F. Buja; A. Gkouzou; G. Pandraud; P.M. Sarro;
In Procedia Engineering: Proceedings of the 30th anniversary Eurosensors Conference,
pp. 1144-1147, 2016.
document - Effect of the interruption of the propagation path on the response of surface acoustic wave transducers
Thu Hang Bui; An Tran; Bruno Morana; Jia Wei; Trinh Chu Duc; P.M. Sarro;
In Proceedings of the IEEE Sensors conference,
2016. - All-SiC surface micromachined nanoreactor for in-situ transmission electron microscopy
B. Morana; C. Silvestri; J.F. Creemer; P.M. Sarro;
In Proc. of the 29th IEEE International Conference of Micro Electro Mechanical Systems,
pp. 753-756, 2016. - Role of atomic layer deposited aluminum oxide as oxidation barrier for silicon based materials
G. Fiorentino; B. Morana; S. Forte; P.M .Sarro;
Journal of Vacuum Science and Technology A,
Volume 33, pp. 01A142, 2015. - A measurement apparatus for switching losses based on an heat-flux sensor
Iero, Demetrio; Della Corte, Francesco G.; Fiorentino, Giuseppe; Sarro, Pasqualina M.; Morana, B.;
In AISEM Annual Conference,
pp. 1-4, 2015. - SAW device for liquid vaporization rate and remaining molecule sensing
Thu Hang Bui; Bruno Morana; An Tran; Tom Scholtes; Trinh Chu Duc; Pasqualina M. Sarro;
In IEEE Sensors Conference,
2015. - Silicon Carbide Technologies applied to MEMS Nanoreactors for in-situ Transmission Electron Microscopy
Bruno Morana;
PhD thesis, Delft University of Technology, 2015. - Atomic-scale imaging of Pt and Pd nanoparticle catalysts during CO oxidation at 1 Bar reaction conditions
Vendelbo, SB; Elkjaer, CF; Puspitasari, I; Creemer, JF; Dona, P; Mele, L; Morana, B; Nelissen, BJ; Roobol, S; Rijn, R van; Helveg, S; Kooyman, PJ;
Microscopy and Microanalysis,
Volume 20, Issue S3, pp. 1570-1571, 2014. - Stiction-Induced Sealing of Surface Micromachined Channels
B Morana; RH Poelma; G Fiorentino; J Wei; JF Creemer; PM Sarro;
Journal of Microelectromechanical Systems,
Volume 23, Issue 2, pp. 459-470, 2014.
document - Tailoring the Mechanical Properties of High-Aspect-Ratio Carbon Nanotube Arrays using Amorphous Silicon Carbide Coatings
Poelma, RH; Morana, Bruno; Vollebregt, Sten; Schlangen, Erik; van Zeijl, HW; Fan, Xuejun; Zhang, GuoQi;
Advanced Functional Materials,
Volume 24, Issue 36, pp. 5737-5744, 2014.
document - Visualization of oscillatory behaviour of Pt nanoparticles catalysing CO oxidation
Vendelbo, SB; Elkj{\ae}r, CF; Falsig, H; Puspitasari, I; Dona, P; Mele, L; Morana, B; Nelissen, BJ; Rijn, R van; Creemer, JF; Kooyman, PJ; Helveg, S;
Nature Materials,
Volume 13, Issue 9, pp. 884-890, 2014. - Electro-thermal simulation and characterization of vertically aligned CNTs directly grown on a suspended microhoplate for thermal management applications
C. Silvestri; P. Piacciafoco; B. Morana; F. Santagata; GuoQi Zhang; P.M. Sarro;
In IEEE Sensors,
pp. 827-830, 2014.
document - CNT bundles growth on microhotplates for direct measurement of their thermal properties
C. Silvestri; B. Morana; G. Fiorentino; S. Vollebregt; G. Pandraud; F. Santagata; GuoQi Zhang; P.M. Sarro;
In 27th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2014),
San Francisco, USA, Jan. 2014.
document - Atomic-scale imaging of catalysts at 1 bar reaction conditions
Elkjaer, CF; Vendelbo, SB; Puspitasari, I; Dona, P; Mele, L; Morana, B; Rijn, R van, Nelissen, BJ; Creemer, JF; Kooyman, PJ; Helveg, S;
In Abstracts Workshop TAILOR-2014,
pp. 49, 2014. - Ald aluminum oxide as protective coating against oxidation of LPCVD SiC microhotplates
Morana, B; Fiorentino, G; Pandraud, G; Creemer, JF; Sarro, PM;
In Micro Electro Mechanical Systems (MEMS), 2013 IEEE 26th International Conference on,
IEEE, pp. 484--487, 2013. - Heat flux sensor for power loss measurements of switching devices
Iero, Demetrio; Corte, Francesco G Della; Fiorentino, Giuseppe; Sarro, Pasqualina M; Morana, B;
In Thermal Investigations of ICs and Systems (THERMINIC), 2013 19th International Workshop on,
IEEE, pp. 327--330, 2013. - Stiction-driven sealing of surface micromachined channels
B. Morana; G. Pandraud; F. Santagata; J.F. Creemer; P.M. Sarro;
In 25th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2012),
Paris, France, IEEE, pp. 329-332, Jan. 2012. ISBN 978-978-1-4673-0325-5; DOI 10.1109/MEMSYS.2012.6170202. - An all-in-one nanoreactor for high-resolution microscopy on nanomaterials at high pressures
J.F. Creemer; F. Santagata; B. Morana; L. Mele; T. Alan; E. Iervolino; G. Pandraud; P.M. Sarro;
In Proc. 24th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2011),
Cancun, Mexico, IEEE, pp. 1103-1106, Jan. 2011. ISBN 978-1-4244-9633-4; DOI 10.1109/MEMSYS.2011.5734622. - In situ HRTEM of a catalyst using a nanoreactor at 1 bar
S.B. Vendelbo; J.F. Creemer; S. Helveg; B. Morana; L. Mele; A.M. Molenbroek; P.M. Sarro; H.W. Zandbergen; P.J. Kooyman;
In Netherlands Catalysis and Chemistry Conference (NCCC-XII),
Noordwijk, pp. 332, Feb. 2011. - A silicon carbide MEMS microhotplate for nanomaterial characterization in TEM
B. Morana; F. Santagata; L. Mele; M. Mihailovic; G. Pandraud; J.F. Creemer; P.M. Sarro;
In 24th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2011),
Cancun, Mexico, IEEE, pp. 380-383, Jan. 2011. ISBN 978-1-4244-9633-4; DOI 10.1109/MEMSYS.2011.5734441. - Wafer-level assembly and sealing of a MEMS nanoreactor for in situ microscopy
L. Mele; F. Santagata; G. Pandraud; B. Morana; F. D. Tichelaar; J. F. Creemer; P. M. Sarro;
J. Micromech. Microeng.,
Volume 20, 2010. - LPCVD amorphous SiCx for freestanding electron transparent windows
B. Morana; J.F. Creemer; F. Santagata; C.C. Fan; H.T.M. Pham; G. Pandraud; F.D. Tichelaar; P.M. Sarro;
In Y. Suzuki; Man Wong (Ed.), Proceedings of IEEE MEMS 2010 Conference,
Wanchai, Hong Kong, IEEE, pp. 572-575), 2010. - Wafer Level Encapsulation Techniques for a MEMS Microreactor with integrated Heat Exchanger
F. Santagata; L. Mele; M. Mihailovic; B. Morana; J.F. Creemer; P.M. Sarro;
In Proceedings of IEEE Sensors 2009 Conference,
Christchurch, New Zealand, pp. 799-802, 2009.
document - Low-temperature wafer-level packaging of a MEMS microreactor with a lateral feedthrough by local PECVD TEOS deposition
L. Mele; B. Morana; C.R. de Boer; J.F. Creemer; P.M. Sarro;
In Proceeding title: Proceedings of the Eurosensors XXIII Conference,
Lausanne, Switzerland, pp. 1531-1534, 2009.
document